Tuesday, July 20, 2010

Tuesday Tutorial -- "Ceramic" Paper Roses

Here's a great tutorial I found on The Scrap Shoppe blog.  I posted it here but I suggest that you click on over to see what else can be found at either The Scrap Shoppe blog or at the Singing Three Little Birds blog.
There are several other tutorials there that you might enjoy.  I hope you like this one, because I think these roses are "the bomb"!

--------------------------------------------------------------------------------------------------------

"Ceramic" Paper Roses
If you missed my guest post during Flower Week at Singing Three Little Birds, here's the lowdown!





These rolled roses originally started out as plain red cardstock. Now they have an almost ceramic look to them. Let me show you how I made them!
 



 1. Start with a couple of pieces of cardstock (I only ended up needing one for all of these flowers, but I grabbed a 2nd piece just to be sure).


 
2. Soak the cardstock, one sheet at a time, under running water. Be sure and wet both sides of the cardstock.
 
3. Wad each piece of cardstock up into a ball. You're going to want it very rumpled so you will need to wad it up, open it, and wad it up again several times. Just be careful that you don't rip the paper.
 
4. Lay the cardstock out flat and allow it to dry. I soaked mine before going to bed and let it dry on the kitchen counter overnight. If you're slightly more impatient you can take a hairdryer to it.
 
From here I tried two different techniques to get the "ceramic" look for the roses. Here is the technique for the single rose.
 



5. From a roughly 5"x5" square of the dried cardstock, cut out a circle. From the circle cut out a spiral. I like to cut my spirals in a wavy fashion to give the final rose a more realistic look.



6. Start with the outermost part of the spiral and start rolling it between your fingers. Contine you to roll until you get to the center of the spiral.



7. Take the center of the spiral and use some adhesive to glue the base to the rest of the rose so it acts as the base of your flower.



8. A pretty little rose!



9. Ink the edges of the rose with a contrasting color. This just makes the rose more realistic so its not uniform in color. You can skip this step if you would rather.



10. Apply a somewhat thick coat of Mod Podge to the rose with a sponge brush. Not too thick though! If its too thick the glue with dry white instead of clear (especially between the petals).



11. Turn the rose over after the front dries and appy more Mod Podge to the back of the rose.



12. Apply a pin, bobby pin, clip, or whatever you like to the back of the rose.



Note: This starts the 2nd "ceramic" technique. (I think I actually like this one better.)



13. Cut three different size squares from the wrinkled cardstock. Apply Mod Podge to each square. Once the front dries, flip it over and apply again to the back.



14. Cut out spirals as before.



15. Once again, start with the outside of the spiral and start rolling the rose.



16. The roses for this set of 3 flowers are more tightly rolled so they can be placed snugly next to one another.



17. Glue the back of the roses as before.



18. Ink the roses at this step if you are so inclined.



19. Apply another coat of Mod Podge just to get the flowers nice and shiny!



20. Line the 3 flowers up in a row and adhere a strip of the red cardstock to the back of the flowers. Apply a small amount of adhesive between each flower to glue them to each other also just to be sure there is no flopping around. Add a pin, bobby pin, or whatever suits your fancy.



The final single rose. I glued some large silver beads to the center.



The final set of 3 roses. I didn't add anything to the center of them since they are wrapped so tightly. And I think they look just as good without the extra embellishment.



Its may be difficult to tell from the photos, but these roses have a great shine to them. And the Mod Podge also makes them very stiff so they also almost feel like they could be ceramic. The wrinkled paper and the waviness of the spiral really give them a realistic look!



So, what to do with these fun new flowers?



Well, since they are pinbacks I can add them to any outfit as a brooch, put them on a belt, add them to a headband...



Or thread them through the chain of my DIY go-to necklace! I'm loving this look!



Other than the time it took the cardstock and Mod Podge to dry (which was really only a few minutes), this was a pretty quick project.






Enhanced by Zemanta

Thursday, July 15, 2010

Thursday--Spa Day

Here's a couple of videos I found to show how easy it is to make many of the skin care products we all use.  By making your own, however, you control the ingredients and the outcomes.  Home made skin care products also make lovely gifts, so it is a good thing to know how to make these.

_________________________________________________________________________________



Enhanced by Zemanta

Wednesday, July 14, 2010

Window Shopping Wednesday

This time I want to showcase a lovely lady who taught me to make the prayer dolls.  She is struggling with cancer and yet she continues to share her knowledge and to make her art dolls.  Please enjoy the pictures and then hop on over to her ning site and leave her a get well message.  Thanks.

______________________________________________________________________________






Enhanced by Zemanta

Tuesday, July 13, 2010

Tuesday Tutorial -- Dolls In Motion

I miss watching the Carol Duvall Show.  HGTV has even gotten rid of most of the archives from the show, so when I run across one, I like to keep it in my favorites.  This is only one of her segments on making art dolls.  She is the first person to show me what an art doll really is and I am indebted to her for it.  It's a shame that there are no really good crafting shows on anymore.  Carol Duvall certainly was a class act and obviously a hard act to follow.  We all miss her.


__________________________________________________________________________________

Carol Duvall Show : Episode CDS-464 -- More Projects »

Click here to view a larger image.

 PDF
Click the icon for figures 1 through 6.
Using a simple wire form and clippers, dollmaker Susanna Oroyan adds mobility to a doll by attaching moving parts. These kinds of doll forms bend easily and can be wrapped with any favorite fabric or ribbon. Oroyan's model may have a wooden head and a frozen smile, but she certainly looks and dresses smart enough to become a prized posession.

Materials:

20-gauge craft wire - for dolls under 12 inches
16 gauge wire (available in hardware stores) - for dolls over 12 inches
masking tape
wire-cutting pliers
batting
embroidery thread - nine skeins in desired colors
one-inch diameter wooden bead
silk ribbon 1/4 inch wide - 12 yards of flesh color, three yards for hair, six yards shoe color, assorted colors for clothing and trim beads, flowers, etc., for embellishments

Steps:
  1. Make a "W" shape with the wire. The loop will support a head (figure 1).
  2. Twist the ends of the wire together at the "neck" (figure 2).
  3. Tape the torso below the neck and above the hip (figure 3).
  4. Bend the wire to form the hips (figure 4).
  5. Bend the wire to form arms and tape them at the shoulders (figure 5).
  6. Wrap the armature with batting (figure 6).
  7. Wrap the body with embroidery thread to build out and add dimension to the form.
  8. Cover the wooden bead (which will become the head) by using a needle threaded with embroidery thread. Run the thread through center hole of the bead until three-fourths of the bead has been covered.
  9. Create the eyes and mouth with flat stitches of embroidery thread.
  10. Attach the head to the body by inserting wire into the bead hole at the neck.
  11. Create a desired hairstyle from some curled silk ribbon.
  12. Wrap ribbon around the doll to make the dress bodice.
  13. For the skirt, gather the fabric and hand-stitch it to the doll's waist.
  14. Embellish as desired.
Susanna's Tips:
  • Figures can be built up more quickly by wrapping with two-ply baby yarn.
  • Instead of using embroidery thread for the flesh, the figure may be finished with a layer of wrapped silk ribbon.
  • Shoes may be created by wrapping the feet with an appropriate color of embroidery thread.
  • Silk ribbons may be curled by pulling them over the scissors blade, just as you would create a gift package ribbon.
  • Embroidery thread may be curled effectively by first dampening it with a 50 percent solution of craft glue and water, and then wrapping it over a metal knitting needle.


Enhanced by Zemanta

Monday, July 12, 2010

More on Paper Beads

Paper Bead Art 

By: Diy maven Mar 13, 2007

When we were kids, my sister Joyce and I rolled paper beads; little did we know we were doing something girls a hundred years earlier had done. Although Joyce and I made funky necklaces with our beads, our Victorian counterparts used the fruits of their labor to fashion curtains for doorways. Nowadays, I like to use paper beads to create 3D art, including greeting cards.
↓ Continue reading

---------------------------------------------------------------------------------------------------------------------
Here's another take on this fun craft:


i rolled my beads onto a piece of wire, as you can see from the pic. you want to roll from the wide side, as tightly as you can, ending with the teeny skinny side and make sure that that end is glued down well. i put about a dozen beads per foot long piece of wire. they will come off pretty easily. i tried using wooden skewers coated in vaseline, but the beads stuck to that. no good. so that is it. you could leave them at that point as is,paper beadsthis is what they look like unsealed... or seal them with mod podge, as many coats as you want. or you could paint the beads, add sparkle or ink or whatever you like. at that point, scrap paper beadsi antique some of my beads, jacquard has really great sparkly pigments that can be put right onto the bead, or, in my favorite way, added to UTEE which is thick embossing powder and then the bead can be rolled in it and heated or heat the utee in a pot and dip your beads in. the more coats of this you put on, the thicker. this stuff is amazing. use different finishes to make the beads look like metal, gems, or pearls, even...pearl paper beadsthese are a bit lumpy and bumpy, but you get the idea. head over to my flickr bead set to see some of the other ones, and new things will be added all the time.
once you are done, you can sand the edges a bit, or sand the whole thing for another look altogether. the options are endless. make small beads that are more plain, or big ones to use as pendents, and make them into any shape. if you wanted to just layer them, you can cut out a form and go from there, or decoupage over something and drill a hole later. so many options! oooh, and photos! you can make a photo bead or pendant. i am going to!

don't be afraid to try different things. this is inexpensive and fun. anyone can do it, and it is a great project for little kids. for those of us that save every little scrap, this is perfect. i am planning to try yarn and fabric, but keep an open mind and have no fear!
a couple of tips: use either a non-stick cookie sheet or some waxed paper so you don't get glue and paper and gunk all over your table or whatever you are using. also, if you use the utee, it can burn you, so be careful with it. baby wipes are a great thing to have handy so you can get the glue and smutz off of your fingers in between beads, as well as cooling off your fingers if your drip hot stuff. roll a really long bead and after it is dry, cut it into several smaller beads with a utility knife...read the entire tutorial
Enhanced by Zemanta

Tuesday, July 6, 2010

Tuesday Tutorial -- Flower Paper Pinwheel

Here is a lovely tutorial for making very beautiful paper flower pinwheels.  I found this on a blog called HELLOmynameisHeather.  Please drop by and let her know how yours turn out.  Click on the first picture and you will find the pdf download directions.  Click on the second picture to see a picture of the back of the pinwheel.  You can find her shop here.



Enhanced by Zemanta

Sunday, July 4, 2010

HAPPY FOURTH OF JULY!!!!!!

Hope you have a safe and fun holiday.  Don't forget to think about our troops who cannot be home to celebrate the founding of our country.

Thursday, July 1, 2010

Thursday--Spa Day--Bath Salts to make for gifts

Here is a fun and quick tutorial to make your own bath salts to give as gifts this year.  We all can benefit from easy gifts to make and give, so I thought I would post this here.  I will be making this to give to may bosses this year.  Great way to let them know that they may need to "chill out" without actually telling them so.
________________________________________________________________________________

Make it: coffee-cinnamon bath salts!

December 2, 2006 at 2:13 pm | Posted in I love to make things..., projects to do | 21 Comments I’ve been meaning to put up some how-to projects over here, and now that it’s December, well, there’s no time like the present! I originally posted this on craftster back in 2003 but I just made a batch and packaged it up differently so I thought I’d bring it back, new and improved…
coffee-cinnamon salt scrub
Infused Bath Salts or Salt Scrub
Original how-to: I’ve made bath salts and used essential oils to scent them before, but I thought I’d try using kitchen stuff instead! It works really well, and it’s easy and pretty cheap to make a big batch. You can adjust the oil-salts ratio to your liking — use more oil to make an exfoliating salt scrub, less to make more traditional bath salts.
You’ll need:
1/2 – 1 cup extra-light olive oil
1/3 cup ground coffee
6 Tbsp cinnamon (or more if you really like cinnamon, mmm)
reusable coffee filter, or several paper filters, in a coffeemaker basket
3 lb. container of Epsom salts
1 cup baking soda (optional)
2 – 4 cup Pyrex measuring cup
large flat saucepan
mixing bowl
1. Warm the olive oil in the Pyrex container in a saucepan of boiling water. Mix in the coffee first, then the cinnamon, stirring to blend as the mixture heats. Continue to infuse for 20 minutes on the stove, stirring from time to time.
2. Pour the coffee-cinnamon-oil mixture through the coffee filter into the large mixing bowl, one-third at a time. Careful not to burn yourself here! Discard the grounds and keep the oil. Let it cool to room temperature.
3. Mix the infused oil with the salts (and baking soda if you’re using it). You’re done!
Update: Stacy mentioned that she infused her olive oil in her crockpot for two hours on high instead of on the stove, and it turned out really well — so you might want to try that. Great idea.
Variation: green tea-ginger. Substitute 1/3 cup green tea and 1/4 cup powdered ginger (cheaper if you buy it in bulk) for the coffee and cinnamon.
Packaging Ideas
I like to use recycled jars or flat plastic bags (very cheap at craft/scrapbooking stores) to package them for gifts. New idea for 2006: the button extravaganza you see here!
bath salts/salt scrub packaging ideas
Just fill a Mason jar with your salt scrub and paint the lid a cool color (I used hot-pink enamel paint, but acrylic is fine too). When the paint is dry, hot-glue assorted buttons over it and on the sides of the jar. Add a piece of rick-rack around the side of the lid if you like, too. (I used my current favorites, glitter hot-glue for the buttons and Aleene’s Tacky Glue for the rick-rack.)
Of course, you could glue on rhinestones, game pieces, or any flat-backed bits and pieces, too. Or make a personalized label: draw or print out something you like on colored paper, and then apply it to the jar with a glue stick. You can seal it with Delta Ceramcoat Gloss.
If you want to ornament a plain plastic bag, just cut a simple flower shape out in two colors of felt — one 1.5 inches across with pinking shears, one 1 inch across with scissors. Glue them down as shown (Aleene’s again) and let them dry completely. Tie it with a ribbon (I wish I could reach into that picture and re-tie that one… it looks awful, sorry about that) and voila!
I’ll be publishing my December getcrafty column on Monday with tons more how-to projects, so stay tuned if you’re looking for ideas on gifts to make this year…

Here's the link to find the original article.  Let her know how these recipes work for you if you try them, won't you?
Enhanced by Zemanta

Wednesday, June 30, 2010

Wordless Wednesday -- Gritty Jane

If you do any surfing for art dolls or any type of painting, you will no doubt come across Gritty Jane.  She has online doll making classes and is a very talented painter.  She has videos on YouTube where you get to watch her at work.  I love the texture and the subject matter in her painting, but I really love her art dolls.  I hope you do too.  Check out her site at grittyjane or at Gritty Jane

Here is just a peek at some of her work:




Enhanced by Zemanta

Tuesday, June 29, 2010

Tuesday Tutorial -- T-shirt rug

Everyone today is always talking about Green-this, or Green-that.  When I was growing up it was just repurposing out of necessity.   So, to show that I understand about greening and being frugal, here is a great tutorial about turning old t-shirts into rugs.  How recycled can you get?

_____________________________________________________________________________________

How to Crochet a Rug out of T-Shirts



Its easy to crochet a rag rug made from strips from old T-shirts.
This is all youll need to make your own upcycled rag rug.
Begin cutting at the bottom hem of the shirt. I cut this part half as wide since its two layers.
Its easy to crochet a rag rug made from strips from old T-shirts. It's easy to crochet a rag rug made from strips from old T-shirts.

It gives me a thrill to make something new, that's useful and beautiful, out of something old and unwanted. Oversized, corporate logo-ed T-shirts are a plentiful resource at your local thrift store or maybe even in your own closet. One of my favorite uses for them is to cut them into strips and crochet them into rugs, like your grandmother's old braided rag rugs but much easier to make!

You will need:
  • T-shirts (anywhere from two on up, depending on size rug desired), the bigger the better
  • Scissors
  • Giant crochet hook (I used 15 mm)


This is all you'll need to make your own upcycled rag rug.

1. Cut the shirts into strips, approximately 1 inch wide. Starting at the bottom, cut in a spiral all the way up the body of the tee, and roll the strip into a ball. Stretch it out as you wind so that the jersey curls up into a cord.


Begin cutting at the bottom hem of the shirt. I cut this part half as wide since it's two layers.


Wind the strip into a ball as you cut.

When you reach the armpits, cut right across the seams until you reach the edge of the sleeves and can't cut continuously anymore. I also cut part of my long strip into some shorter ones so that I can play with the colors.


You can work with long strips, wound into balls, as well as short strips, which will be prejoined for quick color changes.

2. Join the strips. If you're working with long strips wound into balls, you can just overlap the two ends for a few inches when you're ready to join on a new strip or to change colors. But if you want to join lots of short strips for quick color changes, you'll want to join them first so you don't have to keep stopping. Here's how I do it: Cut a small slit in the ends of the two strips you want to join, about 1/2 inch from the end and about 1/4 inch wide.

Go here to finish the tutorial and please leave a comment if you try this out.

Thursday, June 24, 2010

Thursday--Spa Day

Here's a really good and quick recipe to make your own lip balm.  This is something I use all the time and I know you will too.  I especially like the suggestion that you could make a non-color, non-scented balm to use on your cuticles.  I am off to try that.  Please click on the title link to visit the site this originated on.  Leave a message if you try this and like it.
______________________________________________________________________________

How to: Create your own lip balm recipe.

A couple of years ago I saw a great lip balm tutorial at Not Martha. I was very inspired by it and decided to create my own recipe. It was a little difficult finding information about what works best. After a lot of research, I compiled a list of what to do.

The Basics:

For a firm lip balm that can be used in a tube or tub, you will need a ratio of about 2:4 solids to liquids. Solids meaning wax & butters, liquids meaning oils. If you find your final product too thick, add more oils. If it is too thin, add more solids.


For solids, I use bee’s wax & mango butter. Other solids are also available.


For liquids, I use sweet almond oil, olive oil, castor oil, and avocado oil. Other types of liquids are available.

Put all of your ingredients in a double boiler and let them melt. Make sure to stir the mixture. Add essential oils just before you are ready to fill your tubes or tubs. This way they will not have a chance to evaporate.


When creating a recipe, be sure to write down the ingredients you have added to each batch including the measurement. I add ingredients a half teaspoon at a time until I get it right. Once you get it right, you will know just how much of each item you used. There will be no need to figure it all out again.


Equipment Needed:

• Stovetop
• Double boiler to melt ingredients in

• Measuring spoons
• Plastic pipettes (droppers) to help you pour melted ingredients into your tubes or tubs without spilling.
• Tubes or tubs to hold lip balm. I prefer to use metal tins instead of plastic because they have less of an environmental impact.
• Labels, if you plan to sell or give as gifts.


Where to shop:

There is a big selection of recipe’s at the Ponte Vedra Soap Shoppe. I shop at Majestic Mountain Sage. They have many exotic oils and good prices. Be sure to check the net because there may be a new company that has popped up that worthy of attention too. If you can’t wait to get started, and good health food store or Whole Foods Market will carry most of the ingredients you need.


About ingredients:
Castor Oil will make your balm glossy
.

Shea butter can be stinky and needs to be melted at a certain temperature. If you do not pay attention to this it will become grainy. Use mango or another type of butter instead.

Stay away from hydrogenated oils because they are unhealthy.


Vitamin E Acetate is an antioxidant and extends the shelf life of your product. Make sure to use it in every recipe. I use vitamin E oil that comes in gelatin capsules. They are easy to puncture and squeeze into the mixture.


If you prefer a sweet lip balm, add some honey.


If you like tinted lip balm, add some of your favorite lipstick to the mixture. If you want to experiment with making your own colors you can purchase Iron Oxide, Mica Powder, or D&C colors to add to the mixture. Mica Powders will add a shimmer to you final product.

Avoid artificial flavors. There are many natural essential oils that can be used which will increase your lip balm's healing potential.
About Essential Oils:
Use essential oils such as tea tree oil, rosemary, sage, peppermint, spearmint, anise, vanilla, cinnamon oil, camphor oil, lavender or ginger. A combination of any of these can be nice as well.

Tea tree oil is known for its antibacterial, antifungal and antiseptic qualities.

Camphor, and mints are cooling.


Cinnamon and ginger are warming.


Do not use any essential oils that are from the citrus family because they make the skin photosensitive.


About Labels:

If you want to make up your own labels, Dover Publications has a great selection of clip art available. You can sign up for free design samples that they e-mail to you about every other week.


Other uses for ‘lip balm’:
These balms are good for cuticles and hands, if you create one without color or sweetener. Balms are great if you work with PMC too, just as long as you do not use any petroleum products in your recipe.

Enhanced by Zemanta

Wednesday, June 23, 2010

Wordless Wednesday -- Mealy Monster Land

This is one of the first art doll sites I started following regularly.  Her monsters are so dang cute and her blog is just too entertaining.  I hope you will visit her and say "Hi".  Tell her I sent you.  Once you see her work, you, too, will become an avid follower I am sure!  Visit her at mealy monster land.

Here are just a few of her monsters:





Enhanced by Zemanta

Why Are Orcas Attacking Boats?

Recently I have been reading articles and news about Orcas attacking boats and causing quite a bit of anxiety.  Since these whales hunt in p...