Thursday, September 29, 2011

A Faux Fox Stole Tutorial!

Here's a wonderful and funky tutorial I found over at Craftster.
This post is by a wonderful crafter named p.kok and I absolutely love this faux fox stole!
To see this post on the original site just click the link

I can see many of these in my future.  I can't wait to go look at fabric.  Can you just imagine what you could make?  Oh, my!

-------------------------------------------------------------------------------------------------------------


I wanted it to have eyes, but i couldn't find them in any store in town (i orderd some form etsy, since I plan to make more of those scarfs), but i kinda like it the way it turned out.



If you want, i can make a tutrial and post the pattern for the head in the next days. C&C very welcome

edit: THE TUTORIAL!

1. cutting the fabric:
You will need approximately half a yard of some soft warm fabric like wool (fake fur would also probably work pretty well). So first you cut out two head shapes and two rectangles. the rectangles should be around 15 cm wide and the length depends on your wishes (or on the width of the fabric you chose, if you actually bought just half a yard:)). Then you fold the rectangles in half. (you can cut both at once if you have scissors good enough to cut though 4 layers of fabric). Cut them as shown on the picture (that is really really bad, but stupid illustrator won't work so i had to use paint instead:))).



also a "pattern" for the head. just copy it to a word document and size it the way you like.



2. embelishing

If you want to put eyes or noses or any other embellishments on anything (like contrasting fabric on the paws or on the tail) or do any embroidery, do it now (so the stitches won't show later).

3. sewing

put the right sides of the fabric pieces for the head together and sew almost all the way around- leave a gap to turn everything inside out. Then turn everything inside out, iron it and top stitch around the edge and close the gap that was left. Now do the same with the body. Sew the head to the body and voila- you're done!:)

*i hope you understood everything- english is obviously not my first language:) if you have any questions, feel free to ask:)
Enhanced by Zemanta

Sunday, September 11, 2011

Remember the Heroes from 9/11!

We have much to be thankful for, but especially for the courage and strength of all those who acted bravely on this day in our history.  May God bless them and keep them safe from harm always.



Wednesday, September 7, 2011

‎ Niblet & Biscuit Doll Tutorial

Here is a wonderful tutorial I found on Gwenny Penny that I know you will want to try.  This site is full of tutorials and beautiful photographs and I encourage you to visit there, especially if you like this tutorial.

These are the cutest little dolls.  I can see me making several of these in the near future for presents.  Don't you know someone who would simply love to have one?

_________________________________________________________________________________


Let's get to it...

Materials you will need to make one 7 inch doll (either Niblet or Biscuit):
  • Flannel for head, ears, arms, and legs – ¼ yd
  • Cotton for body – fat quarter or large scraps
  • Felt – small scraps (black for eyes, pink for Niblet's inner ears, tan for Biscuit's inner ears and muzzle)
  • Embroidery floss (black, pink, tan)
  • Polyfill
  • Coordinating thread
  • ¼" hole punch
  • Optional: ribbon, buttons, fabric scraps, round cord elastic, and ¼" elastic for dressing up
Remember to backstitch every time you start or stop a seam.

Click here to download, save, or print the templates for the dolls.

Part I: Sewing the Head, Ears, Arms, and Legs

Step 1: Print and cut out all templates.

Step 2: Trace templates onto flannel and cut out. You should have 2 head pieces (template A), 8 arm/leg pieces (template B), and 4 ear pieces (template C or E). Trace template D or templates F and G onto felt and cut out. You should have 2 inner ear pieces (template D or F). If you are making Biscuit you should also have one muzzle piece (template G).

Step 3: Place two arm/leg pieces of flannel together. Sew around ¼" from the outside edge. Repeat for the other three arms/legs. Turn all four arms/legs right side out.


Step 4: Take one flannel ear piece and center one felt inner ear piece on top, lining up the bottom edges of both pieces. Hand sew the felt to the flannel using 3 strands of embroidery floss that match your felt. Repeat for the second ear.

Step 5: Match up one blank flannel ear piece with one felt/flannel ear piece. Line them up with right sides together (felt should be in between the two pieces). Sew around ¼" from the outside edge. Repeat for the other ear. Clip your corners. Turn both ears right side out.


Step 6: Now it's time to create the face. Use the face templates provided for placement of eyes, nose, and mouth. For eyes, use a ¼" hole punch to punch two circles out of black felt. My punch didn't go all the way through the felt, so I finished the cut with scissors. Hand sew black felt eyes onto one flannel head piece using 3 strands of black embroidery floss.
  • For Niblet, embroider the nose using 3 strands of pink embroidery floss and the mouth using 3 strands of black embroidery floss.
     
  • For Biscuit, place the felt muzzle on the flannel face. Attach using 3 strands of black embroidery floss to make three French knots on either side of the muzzle. Embroider the nose and mouth using 3 strands of black embroidery floss.
Step 8: Turn your head right side out. Stuff the head with polyfill. Tuck the raw edges of the gap inside the head. Sew the gap closed. You now have a complete head!


Part III: Finishing the Doll

Step 13: Tightly whipstitch the very base of the head to the very top of the body. Double up your thread when you do this to make sure it's secure. Trust me, we've already had a casualty in our house.


  • Niblet's Skirt

Enhanced by Zemanta

Thursday, September 1, 2011

New Tutorial -- The Sylvia Headband by Nancy's Couture

Here is a delightful tutorial that I found  while looking for something else.  This has got to be one of the best tutorial for a most beautiful headband.  I would be proud to wear this, but I think I would have to fight off my friends.  I guess I better get busy and make one for everyone; that way, I get to wear my own!

This tutorial is from Nancy's Couture where you can read her blog and check out all of the rest of her really cute tutorials.  Leave her a comment when you visit and tell her I sent you.  Oh, if you want to see pictures of this process, you'll have to go to her site.  She has wonderful, up-close photographs that show you exactly what to do. 

________________________________________________________________________________


Supplies Needed

    *
      Strips of fabric (mine range from 1" to 1.5" wide)
    *
      tulle (the soft kind)
    *
      Headband
    *
      Glue gun
    *
      Glue sticks
    *
      Scissors
Put a dot of glue on the inside of one end of the headband.
Put the end of a strip of fabric on the dot of glue.
Place a small dot of glue on the front and wrap fabric to cover the glue.
Continue wrapping the fabric around the headband.
Until you get to the other end of the headband.
Put a dot of glue on the inside and fold the fabric over onto the glue.
Cut of the extra.

For The Roses

Tie a knot at the end of a strip of fabric.
Put some glue on the knot.
Twist the fabric and push into the glue.
Continue twisting and gluing until you get the desired size rose.
Put some glue on the back of the rose and fold the end of the fabric into the glue.
Repeat making various size flowers.

Embellishing The Headband

Fold tulle in half and then in half again. Cut it 3" wide.
Put a generous amount of glue on the headband.
Push the strip of tulle into the glue pleating it as you go.
Put some glue on top of the tulle.
Press flower into glue.
Trim the tulle if needed.  I like mine to be a little shorter on the front than the back.  I also like mine to be uneven. I don't like the tulle to have a straight looking edge.  These are just my personal preferences.
Now you have a pretty new headband.

  Here is the finished  product again!  Don't you want to go right out and get the supplies?


Enhanced by Zemanta

Monday, August 1, 2011

Watercolors to go -- from Tip Junkie

Here is a wonderful tutorial for a wonderful idea!  This is something I want to try myself because maybe if I have this handy, I will be able to grab those moments when I feel inspired.  As it is, those moments are simply lost while I try to find things, or set up a place to work, or something. 

This is a great handmade gift to give to any children on your Christmas list, too.  I know I would have loved to receive one of these when I was younger.  Think how many hours of use this little kit will get from the busy and creative imagination of a child.

Hope you like it.  Hope you try it.  If so, leave me a note about the process, won't you?  You can visit the original site here to check out other ideas.

_________________________________________________________________________________


Every winter my dear friend Catherine Newman gives my kids the most inspired gifts- both handmade and boughten.  Last year she gave Ava a fantastic book called An Illustrated Life, a book about illustrated journaling and sketchbooking and it was a huge source of inspiration for her.  When I get her permission, I will post some things she has been working on, but for now I will share with you a little gift that I am currently making for her as she fills her personal sketchbook with beautiful and funny and original work of her own.  There was an idea for this in the book that an artist shared that I have changed a bit but it will allow her to carry water colors with her and as long as she can find some water (usually not difficult) she can transform her black line drawings into something even more spectacular.  And, it's easy, to boot.
  1.  a metal tin (I used a tin that a pair of scissors came in, which was a perfect fit for the "fantastix") polymer clay (sculpey or fimo- go for the soft type).
  2. tubes of watercolors (I went for the cheap type from Michael's for this first try but you could use fancy ones)
  3. Coloring tools such as "fantastix", which are inexpensive and you can find at any art or craft store. They are basically pens without the ink.  The body is filled with a sponge that holds water so you fill it with water and then can use it with the water colors without having a jar of water for your paintbrush.  You could even watercolor in the car!
  4. White metal paint OR a piece of white plastic cut from a tofu or yogurt container that is large enough to fill (or mostly fill) the top of the tin (this is for mixing colors- you want white for that).
  5. A tube of lip balm (you'll see why).
How to make it:
  1. Take one pack of white polymer clay and break in half.  Roll each half into a snake as long as your tin.

Smoosh them so they are flattened along both long sides and then take your lip balm and press 6 wells into each smooshed snake of clay (use the top of the lip balm that is flat).



2. Follow the manufacturer's directions and bake the clay inside of the tin.  After this cools, you can fill the wells with paint.
3. Fill the wells with paint.  Tap the whole thing to flatten the paint into the wells, or use something (like a paintbrush) to flatten it.  Allow this to dry and it will be ready to use.


4. Paint the top of the lid with white metal paint or glue in a piece of white plastic to provide a white area to mix colors.

5. Now it is ready to go.  If you need to, tie a piece of string or use a rubberband to keep the lid secure.  

If you can't find a long tin like this one, you could always just carry the color sticks in your pencil/pen bag.


Enhanced by Zemanta

Monday, July 4, 2011

Happy 4th of July! Independence Day!

Here in Austin, as in most of Texas, we are having a fireworks ban due to the fire threat and the drought.  So, here is as close as we will get to seeing any fireworks this year, but I hope your firework display is spectacular to celebrate our nation's independence.  From us here in Texas to you where ever you are, Happy 4th of July!







I hope you and yours have a wonderful, safe, and relaxing holiday!

Tuesday, June 7, 2011

Patriotic Pinwheel Wreath--a tutorial

Here's a fun and easy craft to try with your kids for the upcoming 4th of July holiday.  I found this tutorial on AllFreeHolidayCrafts.  Be sure to click on the link to get to a site for printable pinwheel papers!

--------------------------------------------------------------------------------------------------------------------

Patriotic Pinwheel Wreath


With little time and energy remaining, we still wanted to celebrate this 4th of July weekend somehow. So my wheels were turning and I came up with this simple craft to decorate our door. Here are the 6 supplies we used:

- 1 paper plate, center cut out, 1-inch rim remaining
- hole punch
- scissors
- 8 brass fasteners
- white printer paper
- red construction paper

We made 4 squares from one piece of red construction paper. I found a printable pinwheel template at the Family Fun website, and made pinwheels. We punched holes in each pinwheel, pushed brass fasteners through, and then attached them through 8 evenly-spaced holes I had punched around the plate. Voila--a patriotic pinwheel wreath!



This idea was featured at Tip Junkie in May of  2010 and is also linked to:
SYS Thurs
Enhanced by Zemanta

Why Are Orcas Attacking Boats?

Recently I have been reading articles and news about Orcas attacking boats and causing quite a bit of anxiety.  Since these whales hunt in p...