Tuesday, May 25, 2010

Tuesday Tutorial -- PolyDollys

Here's a really cute tutorial for making these little polymer clay doll pins.  This looks like the perfect craft to learn how to use polymer clay.
 
 
Materials:
* Your choice of several bright colors of Premo! polymer clay- 1 ounce (1/2 block) each color.
* clay blade
* craft or Xacto knife
* pasta machine set to widest setting
* brayer or acrylic rod
* *small "kid shaped" cookie cutter. NOTE: if you do not have a kid shaped cookie cutter, you will need paper, pencil and scissors
* super glue
* your choice of magnet or pin back.
* oven,
* oven-tested metal or glass pan to bake items on NOTE: a ceramic tile works well, too.
* timer
Directions:
1. To make a striped cane, condition your clay by running two colors through the pasta machine on the thickest setting.
2. Lay one color on top of the other, and trim using the clay blade.
3. The beginning of the loaf should look like this once it is trimmed.
4. Cut the pieces in half and re-stack on top of each other being careful not to put two of the same color together.
5. Keep cutting and re-stacking until you have a cube of clay stripes. If you have a clay roller or brayer, it helps to adhere the clay to itself if you press it down.
6. Choose two more bright colors and cut each into long thin strips.
7. Stack as you did in step 2, trim evenly.
8. Begin the cane by tightly rolling one of the short ends up upon the striped stack.
9. Continue rolling until you have formed a tightly integrated spiral.
10. Create several different sizes and color combinations of stripes and spirals.
11. Slice a thin slice off your choice of one of the striped canes.
12. The slice should not be too thin-it should be approximately 1/8 to 1/16 inch thick
13. If you have a small "kid shaped" cookie cutter, use that to cut a piece of backing clay in your choice of colors.
NOTE: If you do not have a kid shaped cutter, use the provided pattern to cut out the shape from white paper and adhere it to the top of the clay sheet, and use a craft knife to cut around the outside of the pattern.
14. Arrange several thin slices of canes on the kid shape, being sure to wrap them around the edges if needed. Use the craft knife or clay blade to cut canes to fit if necessary.
15. Roll small triangles for hands out of beige or brown clay, and press them to the hand area. Roll a small flat ball of clay for the head and adhere it as well.
16. If you have the cookie cutter, press it to the edge of a cane as shown to create a hat.
17. Press it to the top of the kid's head, and cut a small striped strip for the hat brim, and press it to the edge of the hat.
18. Press two small seed beads in for eyes.
19. Create many different kids using your imagination and have a wonderful time dressing them! Bake in pan for 30 minutes on the center rack of an oven that's been tested and set to bake reliably at 275 degrees Fahrenheit. When cooled, add pin backs or magnets using super glue.
If you do not have cookie cutter: trace image onto white paper, clip with scissors and place on top of clay, cut around image using craft knife. (Note: image is 2 inches tall by 1/3/4 inches wide).

Here's the link to the original post
Reblog this post [with Zemanta]

No comments:

Why Are Orcas Attacking Boats?

Recently I have been reading articles and news about Orcas attacking boats and causing quite a bit of anxiety.  Since these whales hunt in p...